思科认证640-802模拟试卷10

You want to influence the root bridge selection within the Ezonexam LAN. Which two values are used by spanning tree protocol to elect a root bridge? (Choose two.)

A. Amount of RAM

B. Speed of the links

C. IOS Version

D. MAC Address

E. Bridge Priority

F. IP Address

G. Router ID

As a CCNA candidate, you will be expected to know the OSI model very well. Which of the following are associated with the application layer (layer 7) of the OSI model? (Choose two)

A. TCP

B. Telnet

C. FTP

D. Ping

E. IP

F. UDP

Which two statements describe the operation of the CSMA/CD access method, which is in use on the Ezonexam network? (Choose two)

A. After a collision, the station that detected the collision has first priority to resend the lost data.

B. In a CSMA/CD collision domain, stations must wait until the media is not in use before transmitting.

C. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously.

D. The use of hubs to enlarge the size of collision domains is one way to improve the operation of the CSMA/CD access method.

E. After a collision, all stations run a random backoff algorithm. When the backoff delay period has expired, all stations have equal priority to transmit data.

F. After a collision, all stations involved run an identical backoff algorithm and then synchronize with each other prior to transmitting data.

What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)

A. Set each end of the trunk line to IEEE 802.1Q encapsulation.

B. Set the same VTP management domain name on both switches.

C. Set all ports on the two switched as access ports.

D. Configure one of the two switches as a VTP server.

E. Connect the two switches using a rollover cable.

F. Use a router to forward VTP traffic between the VLANs.

What are two results of entering the VESwitch(config)# vtp mode client command on a Catalyst switch in the Ezonexam LAN? (Choose two.)

Which of the following are spanning tree port states? (Select three answer choices)

A. Learning

B. Spanning

C. Listening

D. Forwarding

E. Initializing

F. Filtering

G. Permitting

While troubleshooting a network connectivity problem, a Ezonexam technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the 7-layer OSI model does the problem most likely exist?

A. The data link layer

B. The application layer

C. The protocol layer

D. The access layer

E. The session layer

F. The network layer

G. None of the above

What is the default configuration register setting on most Cisco routers?

A. 0x2104

B. 0x2012

C. 0x2210

D. 0x2102

E. 0x2142

F. None of the above

You have configured a Ezonexam switch as shown below:

Ezonexam3(config-if)# switchport port-security

Ezonexam3(config-if)# switchport port-security mac-address sticky

Select the action below that results from executing these commands.

A. A dynamically learned MAC address is saved in the VLAN database.

B. A dynamically learned MAC address is saved in the startup-configuration file.

C. Statically configured MAC addresses are saved in the startup-configuration file if frames from that address are received.

D. A dynamically learned MAC address is saved in the running-configuration file.

E. Statically configured MAC addresses are saved in the running-configuration file if frames from that address are received.

F. None of the above

The Ezonexam network was assigned the Class C network 199.166.131.0 from the ISP. If the administrator at Ezonexam were to subnet this class C network using the 255.255.255.224 subnet mask, how may hosts will they be able to support on each subnet?

A. 14

B. 16

C. 30

D. 32

E. 62

F. 64