路由信息协议(RIP)更新路由表的依据是：若相邻路由器RouterB说“我到目的网络Y的距离为N”，则收到此信息的路由器RouterA就知道：“若将下一站路由器选为RouterB，则我到网络Y的距离为(21)”。

(136)

(134)

(135)

(133)

In low-speed network, it is usually adequate to wait for congestion to occur and then react to it by telling the source of packets to slow down. In high-speed networks, this approach often works poorly, because in the(71)between sending the notification and notification arriving at the source, thousands of additional(72)may arrive. In ATM network, a major tool for preventing(73)is(74)control. When a host wants a new virtual(75),it must describe the traffic to be offered and the service expected.

(131)

(130)

(129)

To a router, a flow is a(66)of packets that share the same Characterstics, such as traveling the same(67),using the same(68),having the same kind of security, and so on. A router that supports the handling of flow labels has a(69)table. The table has an entry for each active flow label; each entry defines the(70)required by the corresponding flow label.

(128)