某局域网通过两台路由器划分为3个子网，拓扑结构和地址分配如图6-6所示。为路由器R1的e0端口设置一条到达192.168.3.0/24网段的默认路由的配置语句是(36)。

(136)

(134)

(135)

(133)

In low-speed network, it is usually adequate to wait for congestion to occur and then react to it by telling the source of packets to slow down. In high-speed networks, this approach often works poorly, because in the(71)between sending the notification and notification arriving at the source, thousands of additional(72)may arrive. In ATM network, a major tool for preventing(73)is(74)control. When a host wants a new virtual(75),it must describe the traffic to be offered and the service expected.

(131)

(130)

(129)

To a router, a flow is a(66)of packets that share the same Characterstics, such as traveling the same(67),using the same(68),having the same kind of security, and so on. A router that supports the handling of flow labels has a(69)table. The table has an entry for each active flow label; each entry defines the(70)required by the corresponding flow label.

(128)