单选

●I/O 系统主要有三种方式来与主机交换数据,它们是 (6) 、 (7) 和 (8) 。其中 (6) 主要用软件方法来实现,CPU 的效率低; (7) 要有硬件和软件两部分来实现,它利用专门的电路向 CPU 中的控制器发出 I/O 服务请求,控制器则 (9) 转入执行相应的服务程序; (8) 主要由硬件来实现,此时高速外设和内存之间进行数据交换 (10) 。

 (6)

  • A.程序查询方式    &n
  • bsp;  B.读/写文件方式    
  • C.数据库方式    
  • D.客户/服务器方式    (7) A.DMA方式
  • B.批处理方式
  • C.中断方式
  • D.数据通信方式    (8) A.中断方式
  • B.DMA方式
  • C.并行方式
  • D.流水线方式    (9) A.立即
  • B.在执行完当前一条指令后
  • C.在执行完当前的一段子程序后
  • D.在询问用户后    (10) A.不通过CPU的控制,不利用系统总线
  • B.不通过CPU的控制,利用系统总线
  • C.通过CPU的控制,不利用系统总线
  • D.通过CPU的控制,利用系统总线
参考答案
您可能感兴趣的试题

●Ipv6 is (71) for "Internet Protocol Version 6"。Ipv6 is the "next gener

  • ation" protocol design
  • by the IETF to (72) the
  • current version Inernet Protocol,IP Version 4.Most of to
  • day's internet uses Ipv4,which is now nearly twenty years old.Ipv4 has been remarkably resilient in spite of its age,but it is beginging to have problems.Most importantly ,there is a growing (73)  of Ipv4 addresses,which are needed by all n
  • B.abbreviate
  • C.abbreviation
  • D.initial    (72) A.substitution
  • B.replace
  • C.switchover
  • D.swap    (73) A.scarcity

●DHCP客户端是使用地址 (65) 来申请一个新的IP地址的。

(65)

  • A.0.0.0.0    &n
  • bsp;  B.10.0.0.1    
  • C.127.0.0.1    
  • D.255.255.255.255

●In the following essay,each blank has four choices.Choose the most suitable one from the four choices and write down in the answer sheet.

  • A  (66)  is basically an end point of a communication link between two applications.Sockets that extend over a network connect two or more applications running on separate computers at tached to the network.A socket (67) two
  • B.UDP
  • C.socket
  • D.TCP    (67) A.is made of
  • B.composed of
  • C.is composed of
  • D.is consisted of    (68) A.Email address and IP address
  • B.MAC address and port address
  • C.MAC address and IP address
  • D.port number and IP address    (69) A.full-duplex

●NetXr

  • ay的功能是&n
  • bsp;(64) 。    (64) A.捕获并分析数据包
  • B.发送数据包    
  • C.网络管理查看功能    
  • D.A、B和C

以下属于物理层的设备是 () 。

  • A.网桥  
  • B.网关  
  • C.中继器  
  • D.以太网交换机

VLAN tag在OSI参考模型的 () 实现。

  • A.物理层  
  • B.数据链路层  
  • C.网络层  
  • D.应用层

●以太网100B

  • ASE-TX标准规定的传输介质是&n
  • bsp;(51) 。    (51) A.3类UTP
  • B.5类UTP    
  • C.单模光纤    
  • D.多模光纤
¥

订单号:

遇到问题请联系在线客服

订单号:

遇到问题请联系在线客服