单选

The heated feed-water entering any flash chamber of a flash-type evaporator will __.

  • A.vaporize, with the un-flashed water remaining at the temperature at which it entered the flash chamber
  • B.vaporize, with the un-flashed eater equalizing to the saturation conditions existing in the f lash chamber
  • C.vaporize, with the remaining water a t a temperature greater than it entered the flash chamber
  • D.boil, allowing steam bubbles to rise through the brine at the bottom of the flash chamber
参考答案
您可能感兴趣的试题

Which of the following pumps belongs to centrifugal pump?

  • A.Piston pump
  • B.Screw pump
  • C.Diffuser pump
  • D.Water-ring pump

If the cooling water temperature and the lube oil temperature in a diesel engine are too high, the cause can be ________.

  • A.a dirty lube oil strainer
  • B.internal water leaks
  • C.an oil suction line restriction
  • D.excessive wears of the cooling water pump

A substantial increase in crankcase pressure could be an indication of ______.

  • A.excessive lube oil pressure
  • B.the proper seating of new rings
  • C.a worn cylinder liner
  • D.a malfunctioning cylinder relief valve

The output voltage of a three-phase alternator is regulated by the _____.

  • A.AC voltage to the armature
  • B.AC voltage to the field
  • C.DC voltage to the armature
  • D.DC voltage to the field

Which of the following descriptions best identifies the operating principal of a flash-type evaporator?

  • A.Sea water is heated to boiling temperature while under a vacuum
  • B.Sea water is passed over heated plates in a thin film
  • C.Heated sea water is injected into a vacuum chamber
  • D.Sea water is forced through a heated eductor
¥

订单号:

遇到问题请联系在线客服

订单号:

遇到问题请联系在线客服