单选

When used with reversing reduction gears, medium-speed diesel engines should be bolted to their foundations with fitted bolts at the drive end and clearance(loosely fitted) bolts in other locations .This is done to _____.

  • A.maintain alignment when the ship’s hull is working in heavy seas
  • B.ensure engine vibrations correspond to the natural frequency of the hull
  • C.permit the engine to expand away from the driven equipment as the engine heats up and expands
  • D.maintain engine thrust bearing clearances
参考答案
您可能感兴趣的试题

When an oil fire has been extinguished, the surface of the oil should be kept covered with foam to prevent _____.

  • A.air from contacting the oil vapors
  • B.permitting re-ignition boiling of the heated oil
  • C.spontaneous combustion below the oil surface
  • D.toxic fumes from escaping to the surface

A feeler or thermal bulb is used for the expansion valve to _____.

  • A.detect the temperature
  • B.detect the pressure
  • C.heat the refrigerant
  • D.accelerate the refrigerant

The data to be recorded on this sheet _____ the performance of the engine.

  • A.makes the experts to judge
  • B.enables the experts to judge
  • C.make the experts judging
  • D.enable the experts to judge

The sub-multiple prefix “nano” (n) means _____.

  • A.thousandth (10 to the -3rd power)
  • B.millionth (10 to the -6th power)
  • C.billionth ( 10 to the - 9th power)
  • D.trillionth ( 10 to the - 12th power)

Excessive vibration of an automatically fired auxiliary boiler can be caused by _____.

  • A.air or water in the furnace
  • B.combustion pulses
  • C.fuel oil pump failure
  • D.flame failure
¥

订单号:

遇到问题请联系在线客服

订单号:

遇到问题请联系在线客服