我
- A.Refer to the vessel's Certificate of Inspection
- B.Examine the cargo tanks and fittings
- C.Ask the terminal supervisor or his representative
- D.Check the loading order
- A.Slings or saddles placed at 25-foot（8 meter）intervals
- B.Enough slack in their bight
- C.Topping lifts and runners tied off to winches
- D.All of the above
- A.butterfly valve
- B.spectacle valve
- C.check valve
- D.globe valve
-
The tanks should then be ______ immediately after the measurements or cargo samples have been taken．
- A.topped up
- B.braced
- C.tommed down
- D.re-pressurized
- A.A list of each port of discharge
- B.A line diagram of the vessel's transfer piping
- C.A current crew list
- D.The duties by name of each person in charge required for each transfer operation
-
The use of portable electrical equipment in the pumproom on tank barges is prohibited unless ______．
- A.The pumproom is gas-free
- B.Spaces with bulkheads common to the pumproom are either gas-free，inert，filled with water，or contain grade E liquid
- C.All other compartments in which flammable vapors and gases may exist are closed and secured
- D.All of the above
- A.come-along
- B.crossover
- C.manifold
- D.runaround
- A.Exact quantity of the cargoes
- B.Grades of the cargoes
- C.Location of the delivery point（s）
- D.Name of the consignee（s）
- A.The person in charge on the vessel
- B.The person in charge at the facility
- C.Both persons in charge
- D.The person in charge of either place that is doing the pumping
- A.The name of each person designated as the person in charge of transfer
- B.A line diagram of the vessel's oil transfer piping
- C.Special procedures for topping off tanks
- D.A description of the deck discharge containment system
