单选

_____ system is arranged to ensure that water can be drawn from any tank or the sea and discharged to any other tank or the sea as required to trim the vessel.

  • A.The domestic water
  • B.Bilge water
  • C.Oil transfer
  • D.The ballast
参考答案
您可能感兴趣的试题

The inner part of the condenser should be cleaned with _____.

  • A.gas oil
  • B.diesel oil
  • C.chemical compound
  • D.Freon-12

The purpose of an air compressor unloading device is to _____.

  • A.drain water from the air receiver
  • B.drain water from the cylinders
  • C.delay the compression process until the motor is up to speed
  • D.check pump alignment

Thermostatic expansion valves can be adjusted for _____.

  • A.suction pressure only
  • B.head pressure only
  • C.superheat only
  • D.suction pressure and box temperature

Which of the listed characteristics of lube oil are the most important to the engineer from an operational standpoint?

  • A.Ash content, carbon residue, and gravity
  • B.Viscosity, acidity, and demulsibility
  • C.Pour point, flash, point, and precipitation number
  • D.Auto-ignition point, viscosity index, and film strength

A lube oil sample taken from the main engine lube oil system has dark yellow opaque colorThis is the result of .

  • A.water contamination
  • B.mixing oils of two widely different viscosities
  • C.overheating
  • D.aeration

Each cylinder liner on the marine medium speed engines _____.

  • A.is usually cooled by sea water
  • B.can be replaced when worn out
  • C.is in direct contact with the water in the bore of the cylinder
  • D.can t expand when heated

The space between cylinder liner and jacket is called _____.

  • A.the circulating tank
  • B.the scavenge box
  • C.the cooling water space
  • D.the cooler
¥

订单号:

遇到问题请联系在线客服

订单号:

遇到问题请联系在线客服