单选

The crankshaft deflection is at first to be _____ before and after repair.

  • A.disassembled
  • B.renewed
  • C.measured
  • D.regulated
参考答案
您可能感兴趣的试题

The inner part of the condenser should be cleaned with _____.

  • A.gas oil
  • B.diesel oil
  • C.chemical compound
  • D.Freon-12

The purpose of an air compressor unloading device is to _____.

  • A.drain water from the air receiver
  • B.drain water from the cylinders
  • C.delay the compression process until the motor is up to speed
  • D.check pump alignment

Thermostatic expansion valves can be adjusted for _____.

  • A.suction pressure only
  • B.head pressure only
  • C.superheat only
  • D.suction pressure and box temperature

Which of the listed characteristics of lube oil are the most important to the engineer from an operational standpoint?

  • A.Ash content, carbon residue, and gravity
  • B.Viscosity, acidity, and demulsibility
  • C.Pour point, flash, point, and precipitation number
  • D.Auto-ignition point, viscosity index, and film strength

A lube oil sample taken from the main engine lube oil system has dark yellow opaque colorThis is the result of .

  • A.water contamination
  • B.mixing oils of two widely different viscosities
  • C.overheating
  • D.aeration

Each cylinder liner on the marine medium speed engines _____.

  • A.is usually cooled by sea water
  • B.can be replaced when worn out
  • C.is in direct contact with the water in the bore of the cylinder
  • D.can t expand when heated

The space between cylinder liner and jacket is called _____.

  • A.the circulating tank
  • B.the scavenge box
  • C.the cooling water space
  • D.the cooler
¥

订单号:

遇到问题请联系在线客服

订单号:

遇到问题请联系在线客服